The Model, With Its
Enveloping Coat Of Paper, Is Now Removed To The
Dry-Room.
As the paper skin dries, all wrinkles
disappear, and it gradually assumes the desired
shape.
Finally, when all moisture has been
evaporated, it is taken from the mould an exact
fac-simile of the model desired, exceedingly stiff,
perfectly symmetrical, and seamless.
"The paper is now subjected to the water-proof
process, and the skin, with its keelson, inwales,
and dead-woods attached, is then placed in the
carpenter's hands, where the frame is completed
in the usual manner, as described for wooden
boats. The paper decks being put on, it is then
ready for the brass, iron, and varnish work. As
the skins of these boats (racing-shells) vary from
one-sixteenth of an inch in the singles, to
one-twelfth of an inch in the six-oared outriggers, the
wooden frame becomes necessary to support and
keep them in shape. In applying this invention
to gigs, dingys, canoes, and skiffs, a somewhat
different method is adopted. Since these boats
are subjected to much hard service, and must be
so constructed as to permit the occupant to move
about in them as is usual in such craft, a light
and strong frame of wood is prepared, composed
of a suitable number of pairs of ribs, with stem
and stern pieces cut from the natural crooks of
hackmatack roots. These are firmly framed to
two gunwales and a keelson, extending the
length of the boat; the whole forming the
skeleton shape of the desired model.
Enter page number
PreviousNext
Page 59 of 310
Words from 16202 to 16461
of 84867
